|
|
Lead-acid baterry charger with automatic cycle
Moravec, Pavel ; Friedl, Martin (referee) ; Steinbauer, Miloslav (advisor)
The lead-acid batteries are still important and very often used type of battery even in 21st century. This project is focused on development of charger, which provides fast, but save charging of batteries with respect to maximum life time and reliability. The developed system uses constant current charging and constant voltage charging methods. It's specialized in charging batteries with liquid or gel electrolyte and traction types of batteries, which works with 12 V value of voltage. It's able to charge safely the deeply discharged batteries and when battery is unpluged for a long time, it can keep its capacity at maximum level too. The charger can choose optimal charging process according to the discharged level of battery. Each charging phase is interpreted by light signals and the achievable charging current is 20 A.
|
|
| |
|
|
Switching benchtop power supply 0-30 V, 0-5 A
Galia, Jan ; Pazdera, Ivo (referee) ; Martiš, Jan (advisor)
This thesis deals with the design and construction of switching mode power supply for lab application. Convertor is based on the forward topology with adjustable output voltage regulation from 0 to 30V and with maximal output current 5A. Antoher features of this power supply is adjustable current limiting function which can be set from 0 to 5A. For closed loop control was chose analogue cascade regulation.The contol part consists of operation amplifire TL072 and SG3525 contorl circuit.
|
|
|
Car-battery charger
Kadlec, Josef ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
This bachelor’s thesis is considered by projection and construction of the car battery charger with switching source. One-pulsed conducting changer is base of this charger. The charger is intended for accumulators of nominate voltage 6 and 12V. Accumulators are charged by method of constant voltage with current limitation of 0.5A, 5A, 20A and 50A. Value 50A has reason during stating of car for example in winter, because the charger helps to battery. The device is equipped with additional protection, which protects the charger and also the accumulator and the supply network. Three pilot lights are the next equipment of the device.
|
|
|
Driver of high brightness white LED
Tomášek, Petr ; Kubíček, Michal (referee) ; Frýza, Tomáš (advisor)
This document is analysing LED driving with switch power supply from classic electric network 230V/50Hz. First chapter analysis LED diodes function and its fundamental parameters . In the second chapter, there is essential information about electric power supply. Third chapter is analysing switch power supply, including simple techniques, which are not used nowadays. In the fourth chapter, there is analysis of LED driver and circuit design. Fifth chapter is analysing construction of driver and its safety. There i salso information about measuring of parameters of constructed driver.
|
|
|
Precise LED lamps dimming for stage technology
Šojdr, Marek ; Šteffan, Pavel (referee) ; Levek, Vladimír (advisor)
This bachelor´s thesis discusses the problems of dimming of LED bulbs using DC voltage. It explains basic converters topologies and power factor correction options. Part of the thesis deals with the subharmonic oscillation and possibilities of its elimination. Describes the design of the circuitry of dimmer module for precise dimming of selected types of LED bulbs, revival and testing of the dimmer module. Part of the work is basic for realization of the dimmer (printed circuit board, list of components).
|
|
|
Laboratory Switching Power Supply
Šneidr, Radim ; Petržela, Jiří (referee) ; Šebesta, Jiří (advisor)
The topic of my bachelor´s thesis is a solution to a laboratory switching power supply, look at their benefits, disadvantages and characteristics in terms of EMI. The aim this work is also to design the concept of two outputs switching supply with monolithic circuit, LM2576 with the inclusion of a current limiter and implementation of a test version which will use basic measuring. Further, design a general scheme and the mechanical solution of a power supply including measuring modules. Design layout of printed circuit, complemented with thorough testing.
|
|
|
Adjustable switching power supply
Vyroubal, Rostislav ; Urbanec, Tomáš (referee) ; Baran, Ondřej (advisor)
The aim of this bachelor’s thesis is to create a summary of the convertors, their principles, and to propose the convertor with specific parameters. The printed circuit board is designed for this convertor. Designed convertor is manufactured. Its specific parameters are measured and compared with theoretical parameters. A heatsink is designed for this convertor.
|
|
|
Design of class-D audio power amplifier
Fiala, Roman ; Götthans, Tomáš (referee) ; Brančík, Lubomír (advisor)
This semestral thesis describes class D low frequency power amplifiers and design of specific 2x100W class D power amplifier. The designed amplifier contains a second order sigma-delta modulator in which the quantization is controlled only by the delay of modulator components. This design does not include the clock generator which usually controls the quantization in sigma-delta modulators. This semestral thesis also includes design of a switched-mode power supply for the power amplifier and for the preamplifier. The PSpice program has been used for the design and verification of some sections of circuits. All designs have been built. Also basic parameters of completed circuits were measured.
|
|
|
Digitally Controlled Switching Power Supply
Krška, Vlastimil ; Zamazal,, Michal (referee) ; Šebesta, Jiří (advisor)
This master’s thesis is an introduction to switching mode power supplies, especially focused on digital control. It summarizes the basic topologies of switching mode power supplies, and discusses the fundamental issues of digital power supply control. It also summarizes basic informations about Piccolo microcontrolers, about experimental kit and about main parts of sample source code. Also is described here own implementation of the control law and the theory and implementation of maximum power point tracking. The conclusion of this thesis deals with implemantation a testing of the designed digitally controled switching power supply.
|
guest ::
